Please fill out the form below and we will answer your request as soon as possible.
Definition of Hot wire foam cutter HWS-Easy! is – Simplicity. The hot wire cutter HWS-Easy! cuts all standard polystyrene (EPS, XPS) slab sizes effectively, properly and easily.
Cutting length: | 1340 mm |
Cutting depth: | max. 310 mm |
Transformer 230v: | Pri: 230-volt/ Sec: 40V/200VA |
Transformer 110v: | Pri: 110-volt/ Sec: 40V/200VA |
Weight: | 14,8 kg |
Support plate: | Laminated wood glued together |
Bow: | Painted aluminum profile with ball-bearing supported guide |
Art. #: | HWS-10355 |
Extra Wire: | HWS-10404 |
Scaffold bracket: | HWS-10365 |
Stand base: | HWS-10513 |
Status: | In Stock |
Multifunctional cutters ensures diverse cuts and a wide range of applications across industries.
We ship Foam Cutters and Hot Wire CNC foam cutting machines Worldwide, fast and secure!
Tested in the field by pros and crews across industries — proven reliable every single time.
The hot wire foam cutter HWS-Easy! cutter can be used horizontally (e.g. on a stack of polystyrene slabs or some table), standing (e.g. using special stand base which is avaliable optionally), leaned against the wall or attached to the scaffold rail with the optionally available scaffold bracket. To activate the cutter, there are two options: a push-button or an ON-OFF switch located on the cutter’s bow.
The standard hot wire foam cutter HWS-Easy! model is available as a Classical table cutting device without additional accessories. The bow of hot wire foam cutter HWS-Easy! is made from aluminum profile and equipped with ball-bearing supported side elements, the base board is made from laminated wood and glued together.
The standard KIT includes:
The powerful transformer easily assembled on the device with four screws. After electric connection of the transformer to the bow, using high-quality, splash-proof, XLR industrial plug connectors, Hot wire foam cutter HWS-Easy! is ready for action immediately. Protection class (IP) of transformer is 68. The transformer is available in two options:
We use Nichrome – NiCr wire. We offer ready-made versions of the cutting wire with two lugs on the ends for easy and quick installation on the cutter. You can buy cutting wire by the piece (1 pc) or in large amounts (1kit = 10pc). Wires are in stock and ship immediately after order confirmation.
The hot wire foam cutter HWS-Easy! can be also easily and quickly replaced on building Scaffold with the special Scaffold Bracket. All what You need on the scaffold: Suspend device on the scaffold – Tighten screws – Ready for work.
If You want to increases the possibilities of Hot wire foam cutter HWS-Easy! – the Stand Base is simply irreplaceable. The special Foldable Pedestal / Stand Base enables quick and uncomplicated placing the hot wire foam cutter standing.
Cutting length: |
1340 mm |
Cutting depth: |
max. 310 mm |
Transformer 230v: |
Pri: 230-volt/ Sec: 40V/200VA |
Transformer 110v: |
Pri: 110-volt/ Sec: 40V/200VA |
Weight: |
14,8 kg |
Support plate: |
Laminated wood glued together |
Bow: |
Painted aluminum profile with ball-bearing supported guide |
Art. #: |
HWS-10355 |
Extra Wire: |
HWS-10404 |
Scaffold bracket: |
HWS-10365 |
Stand base: |
HWS-10513 |
Status: |
In Stock |
Cutting length: | 1340 mm |
Cutting depth: | max. 310 mm |
Transformer 230v: | Pri: 230-volt/ Sec: 40V/200VA |
Transformer 110v: | Pri: 110-volt/ Sec: 40V/200VA |
Weight: | 14,8 kg |
Support plate: | Laminated wood glued together |
Bow: | Painted aluminum profile with ball-bearing supported guide |
Art. #: | HWS-10355 |
Extra Wire: | HWS-10404 |
Scaffold bracket: | HWS-10365 |
Stand base: | HWS-10513 |
Status: | In Stock |
Please fill out the form below and we will answer your request as soon as possible.
HWS-Easy
We will get you back next business day.
